K326 / K327 / 2027
Force and pressure overview

Lesson 4 of 6

Measuring density

  • I can apply density = mass / volume to new situations.Syllabus

    Syllabus K326 / K327, 3(g). Apply density = mass / volume to new situations.

Make a guess. You are not marked.

A student lowers a stone into a measuring cylinder of water to find its density. An air bubble sticks to the stone under the water. How does this change the density she calculates?

  1. It comes out too large, because the bubble adds to the volume.
  2. It does not change, because air has almost no mass.
  3. It comes out too small, because the measured volume is too large.
Show the answer

It comes out too small, because the measured volume is too large.

The bubble pushes up the water level as well as the stone, so the rise is bigger than the stone's volume. Dividing the mass by a volume that is too large gives a density that is too small.

To find a density, measure the mass on a balance and find the volume. How you find the volume depends on the object's shape.

Density = mass / volume.

An irregular solid: use displacement

Weigh the solid on a balance. Part-fill a measuring cylinder with water and read the level. Lower the solid in until it is completely under water, then read the level again. The rise in the level is the solid's volume.

Measured mass of the irregular solid: 64.8 g

The small scale divisions are not drawn.

Before immersion

Before immersion: 38 cubic centimetresA measuring cylinder holds water. The reading is 38 cubic centimetres. The solid has a mass of 64.8 grams.020406080Scale in cm338cm3

After full immersion

After full immersion: 62 cubic centimetresThe same cylinder with the solid fully under the water. The reading is 62 cubic centimetres. The solid has a mass of 64.8 grams.020406080Scale in cm362cm3

Solid volume = 62 - 38 = 24 cm3

Density = 64.8 / 24 = 2.7 g/cm3.

The level rises from 38 cm3 to 62 cm3, so the solid's volume is the 24 cm3 rise, not 62 cm3.
Readings for the irregular solid
Quantity and unitReading
Mass of solid / g64.8
Water level before / cm338
Water level after / cm362

Worked example

Volume first, then density

  1. Volume: V = 62 - 38 = 24 cm3.
  2. Density: ρ = 64.8 / 24 = 2.7 g/cm3.

For a good result, the solid must sink, and it must not dissolve or soak up water. No water should splash out. Remove any air bubbles stuck to the solid. Read the bottom of the meniscus, with your eye level with it.

A famous story says Archimedes saw the water level rise as he stepped into a bath. He realised this could measure the volume of an oddly shaped object. The story was first written down by Vitruvius about two centuries later, and some scholars doubt it.

A regular solid: measure its sides

For a cuboid, measure its length, width and height with a ruler, and multiply them to get the volume.

A regular block

Mass: 64.8 g. Measure its length, width and height.

Volume from the dimensions of a cuboidA block of mass 64.8 grams measures 4.0 centimetres by 3.0 centimetres by 2.0 centimetres. Its volume is 24 cubic centimetres and its density is 2.7 grams per cubic centimetre.4.0 cm2.0cm3.0cm

Volume = 4.0 x 3.0 x 2.0 = 24 cm3

Density = 64.8 / 24 = 2.7 g/cm3.

The block measures 4.0 cm by 3.0 cm by 2.0 cm and has a mass of 64.8 g.

V = 4.0 x 3.0 x 2.0 = 24 cm3, so ρ = 64.8 / 24 = 2.7 g/cm3.

A liquid: take away the container

  1. Weigh an empty, dry measuring cylinder.
  2. Pour in some liquid and read its volume.
  3. Weigh the cylinder with the liquid. Take away the empty cylinder's mass to get the liquid's mass.
  4. Divide the liquid's mass by its volume.

For example, an empty cylinder has a mass of 42.6 g. With 50 cm3 of liquid in it, the mass is 82.6 g. The liquid's mass is 82.6 - 42.6 = 40.0 g, so its density is 40.0 / 50 = 0.80 g/cm3.

Read the volume of the liquid at eye level, using the measuring cylinder correctly.

Use the rise, not the final reading. The solid's volume is the second reading minus the first. Dividing by the final reading counts the water as part of the solid.

Check your understanding

A 96 g insoluble solid is fully submerged without trapped air or water loss. The cylinder reading rises from 40 to 72 cm3. What is its density?

  1. 0.333 g/cm3
  2. 1.33 g/cm3
  3. 3.0 g/cm3
Show the answer

3.0 g/cm3

The solid occupies the increase in volume: 72 - 40 = 32 cm3. Density = mass / volume = 96 / 32 = 3.0 g/cm3.

Practise an exam question

Write your answer first, then tick the mark points it makes.

Exam-style question

A stone of mass 62.4 g is lowered into a measuring cylinder containing water. The water level rises from 50.0 cm3 to 74.0 cm3. Calculate the density of the stone in g/cm3 and in kg/m3. [3]

Saved on this browser only. Anyone using this browser can see it.