K223 / K224 / 2027
Physical quantities and measurement overview

Lesson 5 of 7

Timing swings and measuring volume

  • I can choose and explain measuring instruments and methods with suitable range and precision, including the linked quantity-specific determinations.Syllabus

    Syllabus K223 / K224, 1(e). Choose and explain measuring instruments and methods with suitable range and precision, including the linked quantity-specific determinations.

Make a guess. You are not marked.

You want the period of a pendulum, the time for one complete swing, as accurately as possible with a stopwatch. Which is better: timing one swing, or timing twenty swings and dividing by twenty?

  1. Time twenty swings and divide by twenty.
  2. Time one swing, because it is the quantity you want.
  3. Either, because the stopwatch is the same.
Show the answer

Time twenty swings and divide by twenty.

Your reaction time error is about the same either way, about 0.2 s. Spread over twenty swings it becomes 0.01 s per swing, instead of 0.2 s on a single swing.

In short

  • To time one swing of a pendulum, time 20 swings and divide by 20.
  • Count "zero" as you start the stopwatch, not "one".
  • Volume of an irregular solid = water level after - water level before.

Some quantities cannot be read well in one go. Measure something larger that you can read well, then calculate the quantity you want.

The stack of paper in making useful measurements used this idea for a small length. Here it is used for a short time and for an awkward volume.

Time several complete oscillations

The period of a pendulum is the time for one complete oscillation. The bob must return to the same reference point moving in the same direction. Going from one side to the other is only half an oscillation.

  1. Place a fixed reference mark beside the path, for example at the centre of the swing.
  2. Start timing as the bob passes the mark in a chosen direction. Count this as zero.
  3. Count one each time it next passes the mark in that same direction. Stop at 20.
  4. Repeat the timing under the same conditions, find the mean elapsed time, then divide by 20.
Repeated measurements of the time for 20 complete oscillations
TrialTime for 20 oscillations / s
140.6
240.2
340.4
Mean time = (40.6 + 40.2 + 40.4) / 3 = 40.4 sPeriod = time for 20 oscillations / 20 = 40.4 / 20 = 2.02 s.

The delay in reacting at the start and finish is a much smaller fraction of 40 s than of 2 s. Timing many oscillations reduces its fractional effect on the period. Repeating and averaging helps with variation in those delays, but cannot guarantee that all timing errors disappear.

The calculated 2.02 s does not mean a person directly timed one swing to the nearest 0.01 s. It comes from dividing a longer measured interval by an exact count of oscillations.

Use displaced water to measure an irregular solid

Choose a measuring cylinder large enough for the object and final water level, with divisions fine enough to distinguish the rise. Put it upright on a level surface. For water, read the bottom of the curved meniscus at eye level.

Measuring a solid by water displacementTwo simplified drawings show the same measuring cylinder. The supplied lower-meniscus readings are 41 cubic centimetres before and 68 cubic centimetres after a solid is fully submerged. Fine divisions are omitted. The increase is 27 cubic centimetres.BeforeAfterSupplied readings in cm30020204040606080804168Increase = 68 - 41 = 27 cm3
The supplied readings are 41 cm3 before and 68 cm3 after adding the object to the same cylinder. Fine scale divisions are omitted from this simplified drawing. The dotted lines mark the bottom of each water meniscus. Volume of the solid = 68 - 41 = 27 cm3.

The idea is very old. The Roman writer Vitruvius tells a story about Archimedes, who lived in the Greek city of Syracuse over 2200 years ago. In the story he used displaced water to compare the volume of a king's crown with the same mass of gold.

This works when the solid is fully submerged, does not dissolve or absorb water, and no water is lost. Remove trapped air bubbles: they displace extra water and would make the calculated solid volume too large. Avoid splashing when lowering the object.

Count "zero" when you start the stopwatch. A student who says "one" at the start and stops at "twenty" has timed only 19 oscillations. Dividing by 20 then gives a period that is too small.

Check your understanding

A student starts a stopwatch as a pendulum bob passes the centre moving left, and says "one". She says the next number each time the bob passes the centre moving left again. She stops the stopwatch on "twenty" and it reads 38.0 s. Which of these is the period?

  1. 1.90 s
  2. 2.00 s
  3. 2.11 s
Show the answer

2.00 s

She said "one" at the start, so only 19 complete oscillations happened by "twenty". Period = 38.0 / 19 = 2.00 s.

Practise an exam question

Write your answer first, then tick the mark points it makes.

Exam-style question

A student uses a stopwatch to time 20 complete swings of a pendulum. The reading is 32.4 s. Calculate the period of the pendulum. Explain why timing 20 swings gives a more accurate period than timing one swing. [4]

Saved on this browser only. Anyone using this browser can see it.