Skip to notes
9476 / 2027
Chemistry of Aqueous Solutions

Lesson 4 of 8

Choosing an indicator

Match the colour-change range of an indicator to the steep part of the curve.

A-Level 9476 (2026-2027)

  • I can choose indicators from supplied titration data.Syllabus

    Syllabus 9476, 10.1(e). Choose indicators from supplied titration data.

Choose an indicator whose transition sits inside the steep change

Choose an indicator whose colour-change range lies inside the steep part of the titration curve.

Make a guess. You are not marked.

Hydrochloric acid is titrated with sodium hydroxide. Must the indicator change colour at exactly pH 7?

  1. No, any range inside the steep jump works
  2. Yes, or the colour change comes too late
  3. Yes, as the equivalence point is at pH 7
Show the answer

No, any range inside the steep jump works

Near equivalence, a fraction of a drop changes the pH by several units. An indicator that changes anywhere in that steep part gives almost the same titre.

An acid-base indicator is usually a weak acid or base whose two forms have different colours. Its colour changes over a range of pH, often around pKa ± 1. The endpoint is where you see the colour change. The equivalence point is where the amounts have reacted exactly. The two should be close, but they are not the same thing.

Use the supplied transition interval and curve
SituationSuitable reasoning
Strong acid/strong base with a broad steep jumpSeveral indicators may work if their entire useful transition interval lies in the steep region.
Weak acid/strong baseAn alkaline-range indicator such as phenolphthalein, roughly pH 8.2-10.0, commonly matches the steep region; methyl orange, roughly pH 3.1-4.4, changes in the buffer region too early.
Strong acid/weak baseChoose an indicator in the acidic steep region using the actual curve; an alkaline-range indicator usually changes too early when acid is added.
Weak acid/weak baseA broad gradual transition makes visual endpoint selection poor; a pH meter and suitable analysis may be preferable.

An indicator does not need to change colour at pH 7. What matters is how much titrant you add while the colour changes. On a steep part of the curve, this volume is tiny, so the endpoint error is small. If you are given unfamiliar indicators, compare their ranges with the steep part of the curve. Do not just pick a name you know.

Phenolphthalein, the commonest choice for a weak acid with a strong base, has a long history. Adolf von Baeyer discovered it in 1871.

Check your understanding

25.0 cm3 of 0.100 mol dm-3 aqueous ammonia is titrated with 0.100 mol dm-3 HCl. At 25.0 cm3 of acid, the pH falls steeply from about 6.5 to about 3.5. Which indicator is most suitable?

  1. Bromothymol blue, which changes colour over pH 6.0-7.6
  2. Methyl red, which changes colour over pH 4.4-6.2
  3. Phenolphthalein, which changes colour over pH 8.2-10.0
  4. Thymol blue, which changes colour over pH 1.2-2.8
Show the answer

Methyl red, which changes colour over pH 4.4-6.2

Its whole range lies inside the steep drop, so a fraction of a drop changes the colour at equivalence. Equivalence is below pH 7 because NH4+ is slightly acidic.

Watch out for this

A student says: "Phenolphthalein suits ethanoic acid and NaOH because there is a rapid pH change at the end point." What is wrong with this?

Show the answer

Every titration has a rapid change somewhere, so this does not explain the choice. Use the data: its range, 8.2-10.0, lies inside the steep part of the curve, around the equivalence pH of about 8.7. One 2026 prelim mark scheme notes that 'rapid pH change' alone was not allowed: students had to use the information in the table.