Lesson 6 of 8
The output of an a.c. generator
I can explain simple induction applications, including alternating generation and magnetic braking.Syllabus
Syllabus 9478, 18(f). Explain simple induction applications, including alternating generation and magnetic braking.
Make a guess. You are not marked.
A coil rotates at a steady rate in a uniform magnetic field. At which position is the induced e.m.f. largest?
Show the answer
When the coil's plane is parallel to the field, where the flux is zero.
The e.m.f. depends on the rate of change of flux linkage. The flux changes fastest as it passes through zero, which happens when the coil's plane lies along the field.
For a coil turning at a steady rate, the e.m.f. follows a sine curve. It is greatest when the flux linkage is zero, and zero when the linkage is greatest.
Turn the coil at angular speed ω, starting with its normal along B. Then θ = ωt, and Faraday's law gives:
E = -d(NΦ)/dt = NBAω sin ωt
Peak e.m.f.: E0 = NBAω
Worked generator output
Find the peak e.m.f. and the period
A coil of 40 turns, each of area 5.00 × 10-3 m2, turns at 25.0 revolutions per second in a field of 0.200 T.
T = 1/f = 0.0400 s = 40.0 ms
NBA = 40 × 0.200 × 5.00 × 10-3 = 0.0400 Wb-turn
E0 = NBAω = 0.0400 × 50π = 2π = 6.28 V
So NΦ = 0.0400 cos(50πt) Wb-turn and E = 6.28 sin(50πt) V, with t in seconds and the angle in radians.
Initial orientation: 0 ms
A is above the axle and B below. The normal points along B, so the linkage is at its positive maximum. It is not changing at this instant, so the output is zero.
Quarter-turn: 10.0 ms
A is on the right, moving down, and B is on the left, moving up. The linkage is zero but changing fastest. A is positive, so the output is +6.28 V.
Half-turn: 20.0 ms
A is below the axle and B above. The normal points against B, so the linkage is at its negative maximum. Again it is not changing, so the output is zero.
Three-quarter-turn: 30.0 ms
A is on the left, moving up, and B is on the right, moving down. The linkage is zero and changing fastest the other way. A is negative, so the output is -6.28 V.
Flux linkage against time
One turn takes 0.0400 s, so the frequency is 25.0 Hz.
Output e.m.f. against time
Where the linkage is greatest, the output is zero. Where the linkage passes through zero, the output is greatest.
At 0 ms the linkage is greatest, but it is not changing, so the e.m.f. is zero. At 10 ms the linkage is zero but falling fastest, so the e.m.f. is +6.28 V. At 20 ms the linkage is at its negative maximum and the e.m.f. is zero again. At 30 ms the e.m.f. is -6.28 V.
The coil is at right angles to B when the linkage is greatest, and parallel to B when it is zero. Greatest flux linkage does not mean greatest e.m.f. What matters is how fast the linkage changes.
Turning the coil faster
Turn the coil twice as fast, and the linkage changes twice as fast, so the peak e.m.f. doubles. Each turn also takes half as long, so the frequency doubles too. To get a bigger peak at the same frequency, use more turns, a bigger coil or a stronger field.
Recording the output
Readings at 0, 20 and 40 ms would all be zero, although the peaks are at 10 and 30 ms. So sample many times in each cycle. Choose a range that holds the peaks: a ±1 V range would cut off a ±6.3 V output, but a ±10 V range would not.
A real example. Singapore's mains supply is 230 V at 50 Hz. Each cycle takes 1/50 = 0.020 s. The 230 V is an r.m.s. value, so the peak voltage is 230 × √2 = 325 V.
Turning faster changes both the peak and the frequency. In a sketch for faster turning, draw a taller curve with the cycles closer together.
Check your understanding
A coil rotates uniformly in a uniform field with linkage Lambda = 0.0400 cos(50 pi t) Wb-turn. At maximum positive linkage, what is the induced e.m.f.?
Show the answer
Zero.
The linkage-time curve has a horizontal tangent at its maximum. E_ind = -dLambda/dt is therefore zero there; the positive e.m.f. maximum comes a quarter-cycle later for this time origin.
Check your understanding
The coil of an a.c. generator is turned twice as fast. Which of these describes the new output?
Show the answer
Peak e.m.f. and frequency both double.
The linkage changes twice as fast, so the peak e.m.f. NBAω doubles. Each turn takes half the time, so the frequency doubles as well.