Lesson 3 of 11
Measuring a turn
I can understand and use angular velocity.Syllabus
Syllabus 8867, 7(b). Understand and use angular velocity.
I can recall and use v = r omega.Syllabus
Syllabus 8867, 7(c). Recall and use v = r omega.
Make a guess. You are not marked.
You want the period of a steadily turning fan blade, using a stopwatch. Which way gives the most precise period?
Show the answer
Time 20 turns and divide by 20.
The error from starting and stopping the watch is about the same for 1 turn or 20. Spread over 20 turns, it is 20 times smaller for each turn.
To find the period, time many complete turns and divide by the number of turns. This is far more precise than timing one turn.
Time many turns
- Mark a reference line beside the turning platform, and run it at a steady rate.
- Start the stopwatch as the marker crosses the line. Count "zero" at that moment.
- Stop after a set number of turns, such as 20, as the marker crosses the line in the same direction.
- Measure the radius from the axis to the centre of the marker.
- Repeat the timing and take the mean.
For example, three timings of 20 turns are 39.8 s, 40.2 s and 40.0 s. The mean is 40.0 s, so T = 40.0/20 = 2.00 s. With r = 0.400 m, this gives ω = π rad/s and v = 1.26 m/s, as in the first lesson.
Why many turns help
Your error in starting and stopping the watch is about the same for 1 turn or for 20. Spread over 20 turns, it is 20 times smaller for each turn. Repeats show how much the readings scatter. They do not fix a radius measured from the wrong point, or a miscount of turns.
Check v = rω another way
A video can give the speed directly. Film from straight above the platform, with a ruler in the plane of the turn for scale. Between two frames, measure how far the marker moves, and divide by the time between frames. Over a small angle, this straight chord is almost equal to the arc.
Then compare that speed with rω from your timing. Working out v from rω and putting it back in is not a test.
A real example. Earth's own turn is timed against the distant stars. NASA lists this sidereal rotation period as 23.9345 h, which is 86 164 s. The 24 h day is timed against the Sun, which shifts a little against the stars each day. So the length of "one turn" depends on the reference you choose.
Count "zero", not "one", as you start the watch. If you count "one" at the start, only 19 turns have passed when you reach 20, so T comes out too small.
Check your understanding
A marker 0.250 m from the axis is timed for 20 turns: 31.6 s, 31.2 s and 31.4 s. Which of these is its speed?
Show the answer
1.00 m/s
The mean is 31.4 s for 20 turns, so T = 1.57 s. Then omega = 2 pi/1.57 = 4.00 rad/s and v = r omega = 0.250 x 4.00 = 1.00 m/s.