8876 / 2027

Lesson 4 of 5 / Enzymes and investigations

Two ways to measure an enzyme rate

How do you turn an enzyme experiment into a rate?

I can measure a rate from product made (catalase and oxygen) or from substrate lost (amylase, starch and iodine).

  • I can investigate and explain temperature, pH, enzyme and substrate concentration effects using rate measurements.Syllabus

    Syllabus 8876, Core 1(o). Investigate and explain temperature, pH, enzyme and substrate concentration effects using rate measurements.

About 5 min

Make a guess. You are not marked.

Catalase gives off oxygen quickly at first, then more and more slowly. Why does it slow down?

  1. The hydrogen peroxide is being used up.
  2. The oxygen is denaturing the catalase.
  3. The catalase is being used up.
Show the answer

The hydrogen peroxide is being used up.

With less substrate, effective collisions become rarer, so the rate falls. That is why you compare initial rates.

The key idea

A rate is a change divided by the time it took. Measure the product made, such as oxygen from catalase, or the substrate lost, such as starch broken down by amylase.

Explore the idea

Make the rate measure explicit

0204060Oxygen (cm3)Time (s)010

From 0 to 40 s: (8 - 0)/(40 - 0) = 0.20 cm3 s-1. From 40 to 60 s the mean rate is lower: (10 - 8)/20 = 0.10 cm3 s-1.

Original data for calculation practice. The catalase values are 0, 4, 8 and 10 cm3 at 0, 20, 40 and 60 s. Real investigations need calibrated measurements, controlled conditions and repeats; this does not certify practical skill.

Explanation

The rate of a reaction is the change in an amount divided by the time taken. You can follow the product as it forms, or the substrate as it disappears.

Catalase is an enzyme that breaks down hydrogen peroxide into water and oxygen. Collect the oxygen in a gas syringe and read the volume every 10 or 20 seconds. Then rate = volume of oxygen / time, in cm3 s-1. For example, 18 cm3 in 60 s gives 0.30 cm3 s-1.

Plot volume against time. The line is steepest at the start, then flattens as hydrogen peroxide is used up. So compare initial rates: the gradient, or change in volume divided by change in time, of the first straight part.

Amylase is an enzyme that breaks starch down into maltose, a sugar. Iodine solution turns blue-black with starch and stays orange-brown without it. Put a drop of iodine in each well of a spotting tile. Every 10 seconds, add a drop of the mixture to the next well. The endpoint is the first drop that stays orange-brown. Examiners report that some candidates say the enzyme reacts with the iodine. It does not: iodine reacts with starch.

A faster reaction reaches the endpoint sooner, so use 1/time as the rate, in s-1. This works only when every tube starts with the same amount of starch and uses the same endpoint. So 1/time is a relative rate for comparing tubes, not an amount of starch per second.

Step by step
  1. 1

    Choose what to measure

    Product made, such as oxygen from catalase, or substrate lost, such as starch with amylase.

  2. 2

    Work out the rate

    Gas: volume / time from the first straight part. Endpoint: 1 / time.

  3. 3

    Keep the comparison fair

    Use the same starting amounts, the same endpoint and the same sampling interval.

Worked example

Two useful rate calculations

A catalase reaction produces 12 cm3 of oxygen in its first 30 s. Two amylase tubes reach the same endpoint in 40 s and 80 s. Calculate the rates.

One way to explain it

Catalase: 12 / 30 = 0.40 cm3 s-1 over the first 30 s. Amylase: 1/40 = 0.025 s-1 and 1/80 = 0.0125 s-1. By this measure, the 40 s tube is twice as fast.

Why this answer works
  • State what was measured and over what time.
  • Use cm3 s-1 for gas volume and s-1 for 1/time.
  • Compare 1/time only for tubes with the same starting amounts and endpoint.

Watch out for this

A student says: "The enzyme reacts with the iodine to give the colour change." What is wrong with this?

Show the answer

Iodine reacts with starch and turns blue-black. Once amylase has broken down the starch, the iodine stays orange-brown. The enzyme plays no part in the colour.

In the real world

The iodine test, 1814

The iodine test for starch was first described in 1814. In 1937 the biochemist Charles Hanes studied how amylases break down starch by following the changes in iodine colour.

Source: Wikipedia, "Iodine-starch test"

Check your understanding

Amylase tube A reaches the iodine endpoint in 30 s. Tube B, with the same starting starch, takes 90 s. How do their rates compare?

  1. B is three times as fast as A, because it ran for longer.
  2. A is faster by 60 s-1, the difference between the two times.
  3. A is three times as fast as B.
Show the answer

A is three times as fast as B.

1/30 = 0.033 s-1 and 1/90 = 0.011 s-1, so the rate in A is three times the rate in B.

Quick recall

Card 1 of 3. Answer in your head, then check.

How do you turn an enzyme experiment into a rate?

You can return to this lesson any time.