Lesson 3 of 7
Choosing measuring instruments
I can choose and explain measuring instruments and methods with suitable range and precision, including the linked quantity-specific determinations.Syllabus
Syllabus K326 / K327, 1(e). Choose and explain measuring instruments and methods with suitable range and precision, including the linked quantity-specific determinations.
Make a guess. You are not marked.
You need the diameter of a thin wire, about 0.5 mm across. Which instrument gives the most precise reading?
Show the answer
A digital micrometer, which reads to 0.001 mm.
The micrometer has the smallest reading step of the three, so it shows the most detail in a 0.5 mm diameter. A metre rule could not even show one whole division.
Choose an instrument that can cover the measurement and distinguish the detail you need.
A metre rule is useful for a book, but its divisions are too coarse to measure the thickness of one sheet of paper well. A micrometer can resolve a small thickness, but cannot directly span a room.
- Range
- The span of values the instrument can measure, such as 0 to 150 mm for a pair of calipers.
- Resolution
- The smallest change you can read from the scale or display, such as a 0.01 mm display step.
- Precision
- How closely repeated measurements agree. Readings with little spread are precise, but may all share the same error.
- Accuracy
- How close a measurement is to the true or accepted value. Checking the zero and using the instrument correctly help avoid a consistent offset.
A smaller display step does not guarantee an accurate measurement. A digital balance could show the same value repeatedly while its zero is wrong. Its readings would agree closely but remain displaced from the true value.
Match the instrument to the object
These are example ranges and resolutions. Check the actual instrument's markings and specification before choosing it.
Digital calipers may also have inside jaws for an internal diameter and a depth rod for a hole. Choose the correct contact surfaces. For a diameter, align the measurement across the widest part through the centre; tilting the instrument can give the wrong length.
A Singapore one-dollar coin from the current series, issued since 2013, is 24.65 mm across. Digital calipers can show all four figures. A rule with millimetre divisions can only show that the coin is about 25 mm across.
Ask three questions before measuring
- Will it fit? Check the object's expected size against the instrument's range.
- Can I distinguish enough detail? Check the divisions or display step against the required measurement.
- Can I use it properly? Consider alignment, access, the object's shape and whether contact could deform it.
For a very thin sheet, another useful approach is to measure the thickness of a closely packed stack and divide by the number of sheets. This gives an average thickness; gaps or compressing the stack would affect the result.
Once an instrument is chosen, use sensible measurement methods to read it, check its zero and record the result.
Check your understanding
A rod is about 120 mm long. You need an instrument with a reading step of 0.1 mm or smaller. Which of these is suitable for measuring its length directly?
Show the answer
Digital calipers with a 0-150 mm range and 0.01 mm resolution.
120 mm is within the 150 mm range, and a 0.01 mm reading step is smaller than 0.1 mm. You must still check the zero and align the jaws correctly; the display step does not guarantee accuracy.