K223 / K224 / 2027
Kinematics overview

Chapter revision

Revision summary

Key ideas, equations and common mistakes. Open any topic below for the full explanation.

Average speed
Total distance / total elapsed time. Include stops. Unit: m/s.
Acceleration
(v - u) / t. Constant throughout a uniform interval; otherwise an average. Unit: m/s2.
Free fall near Earth
g is approximately 10 m/s2 downwards. Air resistance is neglected.
What height, gradient and area tell you
FeatureDistance-timeSpeed-time
HeightDistance in mSpeed in m/s
GradientSpeedAcceleration
Horizontal lineAt restConstant speed; rest only at zero
AreaDoes not give distance or displacementDistance travelled

Measure free-fall acceleration

Two light gates time the passage of the same short flag. Speed = flag length / blocked duration. For approximately uniform acceleration, assign each speed to the midpoint of its blocked interval, then use the time between those midpoints in a = (v - u) / t. The supplied speeds 1.00 and 2.00 m/s at 0.0100 and 0.1120 s give about 9.8 m/s2 downwards. This is a free-fall determination only if other forces are negligible. Align the flag and gates, use a suitable timer and keep the attached body out of the beam; repeats do not fix a wrong flag length or time interval.

Check your answer

  • Identify the axes and the time interval.
  • Use changes on both axes for a gradient.
  • Split graph areas into rectangles and triangles; triangle area = (1/2) x base x height.
  • Give units, and direction when the quantity needs it.
  • State assumptions such as uniform acceleration or negligible air resistance.
Back to the first section

Practise an exam question

Write your answer first, then tick the mark points it makes.

Exam-style question

A cyclist starts from rest and accelerates uniformly to 6.0 m/s in 4.0 s. She then rides at a constant 6.0 m/s for a further 10 s. Calculate the total distance she travels in the 14 s. [2]

Saved on this browser only. Anyone using this browser can see it.

Review a topic

Read whole chapter

Next chapter: Force and pressure