Lesson 4 of 5
How mass affects acceleration
I can apply resultant force = mass x acceleration to new situations.Syllabus
Syllabus K223 / K224, 4(c). Apply resultant force = mass x acceleration to new situations.
In short
- With the same resultant force, a larger mass has a smaller acceleration.
- Doubling the mass halves the acceleration.
- For one object, resultant force / acceleration always equals its mass.
The same resultant force gives a larger mass a smaller acceleration.
This lesson uses resultant force = mass x acceleration.
With the same resultant force, a larger mass has a smaller acceleration. A 4 N resultant gives a 2 kg trolley an acceleration of 2 m/s2. It gives a 4 kg trolley an acceleration of 1 m/s2. Doubling mass halves acceleration when the resultant is unchanged.
An Airbus A380 can take off with a mass of more than 500 tonnes. Even with four engines it gains speed slowly, so it needs a long runway. Changi Airport's main runways are 4 km long.
A larger mass does not need a force to keep it moving. Mass makes a body harder to speed up and equally harder to slow down. A loaded lorry needs a larger braking force than an empty one to stop in the same time.
Investigating the relationship
The model data below are for a trolley of fixed mass 0.50 kg. The forces listed are resultant forces, with resistance already taken off.
| Resultant force / N | Acceleration / (m/s2) |
|---|---|
| 0.20 | 0.40 |
| 0.40 | 0.80 |
| 0.60 | 1.20 |
Doubling the resultant from 0.20 to 0.40 N doubles acceleration from 0.40 to 0.80 m/s2. The ratio Fresultant / a is 0.50 kg in every row, which matches the fixed mass. For this model, a graph of acceleration against resultant force would be a straight line through the origin.
In a real test, keep the trolley's total mass the same and use a level track. Change the horizontal pull and find the acceleration from motion readings. Allow for resistance when you find the resultant. A motion sensor or timed velocity readings can give the changes needed for a = (v - u) / t.
More detail (optional)
Repeat readings to see how much they vary. A track that slopes a little adds a part of the weight along the track. Resistance that changes can make the measured pull differ from the resultant you assumed. Deal with those causes. Do not call every mismatch "human error". Real data need not fall exactly on the model values.
Check your understanding
The same resultant force of 6 N acts first on a 2 kg trolley, then on a 6 kg trolley. Which of these compares their accelerations?
Show the answer
The 6 kg trolley has one third of the acceleration: 1 m/s2 against 3 m/s2.
a = F / m. For the 2 kg trolley, a = 6 / 2 = 3 m/s2. For the 6 kg trolley, a = 6 / 6 = 1 m/s2. Three times the mass gives one third of the acceleration.