Skip to notes
K223 / K225 / 2027
Particles and Atoms

Full chapter

Particles and Atoms

From changes of state to counting the particles in atoms and ions.

SEC G2 Science K223 / K225 (2027)

01

Solids, liquids and gases

The particles are the same in all three states; only their arrangement, spacing and movement differ.

All matter is made of tiny particles that are always moving. This is the kinetic particle theory; kinetic means to do with movement. In a solid, the particles are packed close together in a regular pattern, and they can only vibrate about fixed positions. In a liquid, the particles are still close together, but they are arranged irregularly and slide past one another. In a gas, the particles are far apart and move quickly in all directions.

Compare states without changing the particles
StateArrangement and movementObservable behaviour
SolidClose, regular; vibrate in fixed positionsFixed shape and volume
LiquidClose, irregular; move past one anotherFixed volume; takes container shape
GasFar apart; random movementNo fixed shape or volume; readily compressed

In 1827, the Scottish botanist Robert Brown watched tiny grains from pollen jiggling about in water under a microscope. Water molecules, far too small to see, keep hitting each grain from all sides. This random jiggling, now called Brownian motion, is evidence that the particles in a liquid are always moving.

A gas spreads to fill any container. It is also easy to squash, or compress, because there is a lot of empty space between its particles. Compressing a gas pushes the particles closer together. Solids and liquids hardly compress, because their particles are already close together.

Check your understanding

A sealed syringe of air can be pushed in a long way, but a sealed syringe of water hardly moves. Why?

  1. Pushing the plunger squashes each air particle into a smaller size.
  2. Air particles are smaller than water particles, so more of them fit into less space.
  3. Air particles are far apart, so they can be pushed closer; water particles are already close together.
Show the answer

Air particles are far apart, so they can be pushed closer; water particles are already close together.

Compressing a gas only removes some of the empty space between its particles. In a liquid, the particles are already close together, so there is almost no space to remove.

Watch out for this

A student says: "In a liquid, the particles are far apart, with spaces between them, so they can move past one another." What is wrong with this?

Show the answer

Liquid particles are close together, almost as close as in a solid. They can move because they are not held in fixed positions, so they slide past one another. Only gas particles are far apart. Examiners report answers that call particles "far apart" and "closely packed" at the same time. Choose the one description that fits the state.

02

Changes of state and heating curves

Melting and boiling take in energy to overcome the attractions between particles, so a pure substance stays at a constant temperature while it changes state.

Make a guess. You are not marked.

Crushed ice at 0 degrees C is heated steadily and stirred. What does the thermometer show while the ice is melting?

  1. It rises steadily the whole time it is heated
  2. It stays at 0 degrees C while ice melts
  3. It drops below 0 degrees C first, then rises
Show the answer

It stays at 0 degrees C while ice melts

The energy supplied overcomes the attractions between particles instead of making them move faster, so the temperature stays constant.

Heating and cooling
  1. Solid to liquid: melting

    Particles take in energy and vibrate more. At the melting point, they overcome enough of the attractions to slide past one another.

  2. Liquid to gas: boiling or evaporation

    Particles take in energy and overcome the attractions between them, so they escape and spread far apart. Boiling happens throughout the liquid at its boiling point. Evaporation happens only at the surface and can happen below the boiling point.

  3. Gas to liquid: condensation

    Particles lose energy, move closer together and are held by attractions again. Energy is given out to the surroundings.

  4. Liquid to solid: freezing

    Particles lose energy and settle into fixed positions in a regular pattern. Energy is given out to the surroundings.

  5. Solid to gas: sublimation

    Some solids, such as dry ice (solid carbon dioxide) and iodine, turn straight into a gas without melting. The reverse change, gas straight to solid, is called deposition.

Evaporation explains why wet laundry dries in Singapore. Daytime temperatures there usually reach only 31 to 33 °C, far below the boiling point of water, 100 °C. Even so, some water particles at the surface have enough energy to escape into the air.

When a substance is heated and stays in the same state, its particles gain kinetic energy and move faster, so its temperature rises. Temperature measures the average kinetic energy of the particles. While a pure substance melts or boils, the energy it takes in overcomes the attractions between particles instead of speeding them up. So the temperature stays constant until the change of state is complete.

Heating a pure substance

The temperature rises while the substance is solid. It stays flat at the melting point, where solid and liquid are both present, and rises again for the liquid. It stays flat for longer at the boiling point, where liquid and gas are both present, then rises for the gas.

Schematic curve for steady heating at constant pressure; no temperatures are implied. Boiling lasts longer than melting because separating the particles completely takes more energy.

Check your understanding

Ice is melting while its temperature stays constant. Is it absorbing energy?

  1. No. The temperature is steady, so no energy is entering or leaving the ice.
  2. Yes. The energy raises the speed of the particles, but the thermometer is too slow to show it.
  3. Yes. The energy overcomes the attractions between particles instead of raising their speed.
Show the answer

Yes. The energy overcomes the attractions between particles instead of raising their speed.

During melting, energy is absorbed to break up the fixed arrangement, not to raise the average kinetic energy. A constant temperature does not mean no energy is transferred.

Cooling reverses these changes. As a gas condenses or a liquid freezes, attractions form between the particles and energy is given out. This energy balances the heat lost to the surroundings, so the temperature again stays constant. In every change of state, the particles stay the same size; only their arrangement, spacing and movement change.

Watch out for this

A student says: "Bromine melts at -7 degrees C and boils at 59 degrees C. At 25 degrees C it is a liquid, because 25 degrees C is above its melting point." What is wrong with this?

Show the answer

Being above the melting point only shows that bromine is not a solid. It is a liquid because 25 degrees C is above its melting point and below its boiling point. Above 59 degrees C it would be a gas. Examiners report many answers that compare the temperature with only the melting point or only the boiling point. Compare it with both.

Exam-style question

A pure liquid, X, is left to cool. Use its temperature readings to answer (a) to (d). [6]

Temperature of X as it cools
time / mintemperature / °C
090
274
463
663
863
1055
  1. (a) State the freezing point of X. [1]
  2. (b) State the physical state or states of X at 6 minutes. [1]
  3. (c) Explain, in terms of particles and energy, why the temperature stays constant from 4 to 8 minutes. [2]
  4. (d) Describe how the arrangement and movement of the particles change as X turns from liquid to solid. [2]

Saved on this browser only. Anyone using this browser can see it.

03

Inside an atom

An atom has a tiny nucleus of protons and neutrons, with electrons arranged in shells around it.

Make a guess. You are not marked.

Rutherford's team fired tiny, fast, positively charged particles at a very thin sheet of gold. What happened to most of the particles?

  1. They bounced back off the solid sheet of gold
  2. They stopped and stayed stuck inside the gold
  3. They passed through with little or no change of direction
Show the answer

They passed through with little or no change of direction

Most of each gold atom is empty space, so most particles met nothing in their way. Only about one in every few thousand bounced back, after passing very close to a tiny, positive nucleus.

Every atom has a tiny central nucleus. It holds protons and neutrons, which together are called nucleons. Electrons move around the nucleus in shells, also called energy levels. An atom has equal numbers of positive protons and negative electrons, so it has no overall charge.

Scientists worked out this structure step by step. J. J. Thomson showed in 1897 that atoms contain electrons. In 1911, Ernest Rutherford explained the gold-foil results: the positive charge and almost all the mass sit in a tiny nucleus. James Chadwick discovered the neutron in 1932.

Subatomic particles
ParticleRelative chargeApproximate relative massPosition
Proton+11Nucleus
Neutron01Nucleus
Electron-11/1840; negligible compared with a protonShells around nucleus

Protons and neutrons have about the same mass. An electron's mass is so small that it can usually be ignored, so almost all of an atom's mass is in its nucleus.

A simple shell model

A lithium-7 nucleus contains three protons and four neutrons, with two electrons in the first shell and one in the second.

A simplified energy-level model, not a scale drawing or fixed electron paths.

Check your understanding

A lithium atom has 3 protons, 4 neutrons and 3 electrons. About how much of its mass is in its nucleus?

  1. About 70%, since 7 of its 10 particles are in the nucleus
  2. Almost all of it, more than 99.9%
  3. About half, since the electrons balance the protons
Show the answer

Almost all of it, more than 99.9%

The nucleus has a relative mass of 3 + 4 = 7. The 3 electrons add only about 3/1840, roughly 0.002, so almost all the mass is in the nucleus.

Electrons fill the shells from the inside out. To find how many electrons an atom has, use its proton number from the Periodic Table. The first shell holds up to 2 electrons. For the first 20 elements, the second and third shells each hold up to 8. Any further electrons go into the fourth shell. So sodium, with 11 electrons, is 2,8,1 (also written 2.8.1), and calcium, with 20 electrons, is 2,8,8,2. You do not need orbital labels such as s, p, d or f.

Check your understanding

Neutral sodium has proton number 11. What are its numbers of protons and electrons, and its electron arrangement?

  1. 11 protons and 10 electrons, arranged 2.8
  2. 11 protons and 12 electrons, arranged 2.8.2
  3. 11 protons and 11 electrons, arranged 2.8.1
Show the answer

11 protons and 11 electrons, arranged 2.8.1

A neutral atom has equal numbers of protons and electrons. Eleven electrons fill the shells as 2, then 8, then 1.

Watch out for this

A student says: "Sulfur's box in the Periodic Table shows 32, so a sulfur atom has 32 electrons to arrange in shells." What is wrong with this?

Show the answer

The 32 at the bottom of the box is the relative atomic mass, which depends on the protons and neutrons in the nucleus. An atom has as many electrons as protons, so use the top number, the proton number, 16. A sulfur atom has 16 electrons, arranged 2,8,6. Examiners reported that the most common wrong electron arrangement for sulfur had 32 electrons.

04

Atomic numbers, isotopes and ions

The proton number fixes the element; isotopes differ only in neutrons, and ions differ only in electrons.

Make a guess. You are not marked.

Chlorine-35 and chlorine-37 each react with sodium. How do their reactions compare?

  1. They make different compounds with sodium
  2. Chlorine-37 reacts faster because it is heavier
  3. They react in the same way
Show the answer

They react in the same way

Isotopes have the same number of protons and electrons, and chemical reactions depend on electrons. Only the neutron number differs.

The proton number (atomic number), Z, is the number of protons in the nucleus of an atom. It identifies the element: every carbon atom has 6 protons. The nucleon number (mass number), A, is the total number of protons and neutrons in the nucleus.

In nuclide notation, the nucleon number is written at the top left of the symbol and the proton number at the bottom left. So 126C is a carbon atom with 6 protons and 12 - 6 = 6 neutrons. A neutral carbon atom also has 6 electrons.

Isotopes are atoms of the same element with the same number of protons but different numbers of neutrons. Carbon-12 and carbon-14 both have 6 protons, but they have 6 and 8 neutrons. Their atoms have the same number of electrons, arranged in the same way. Reactions involve electrons, so isotopes have the same chemical properties. Physical properties that depend on mass, such as density, differ slightly.

Medicine makes use of this. At Singapore General Hospital, patients with some thyroid conditions swallow iodine-131. The thyroid, a gland in the neck, uses iodine to make a hormone. So it takes up iodine-131 in the same way as ordinary iodine-127. The radiation from the iodine-131 then destroys the unwanted thyroid cells.

Watch out for this

A student says: "Chlorine-35 and chlorine-37 have the same chemical properties because they have the same number of protons." What is wrong with this?

Show the answer

The same number of protons makes both atoms chlorine, but it does not explain how they react. Reactions involve electrons, so say the isotopes have the same number of electrons, arranged in the same way (the same electronic configuration). Examiners reported that few candidates explained this: many wrote "same number of protons". "Same number of outer electrons" alone was not enough either, because elements in the same group share that.

An ion is a particle with an overall charge. It forms when an atom loses or gains electrons. The nucleus does not change, so the numbers of protons and neutrons stay the same. Losing electrons gives a positive ion; gaining electrons gives a negative ion.

Count the particles
  1. Protons = Z

    The element identity fixes the proton count.

  2. Neutrons = A - Z

    Only protons and neutrons contribute to nucleon number.

  3. Electrons: start with Z

    Subtract electrons for a positive ion; add electrons for a negative ion.

Worked exampleCount particles in ions

Find protons, neutrons and electrons in 2412Mg2+ and 3517Cl-.

Try it first. Then show the worked stepsHide the worked steps
  1. Magnesium: protons = 12; neutrons = 24 - 12 = 12. A 2+ charge means two electrons lost: 12 - 2 = 10.
  2. Chlorine: protons = 17; neutrons = 35 - 17 = 18. A 1- charge means one electron gained: 17 + 1 = 18.
Answer

Mg2+: 12 p, 12 n, 10 e. Cl-: 17 p, 18 n, 18 e.

Check your understanding

An aluminium ion, Al3+, has proton number 13 and nucleon number 27. How many protons, neutrons and electrons does it have?

  1. 13 protons, 27 neutrons and 10 electrons
  2. 13 protons, 14 neutrons and 10 electrons
  3. 13 protons, 14 neutrons and 16 electrons
  4. 13 protons, 11 neutrons and 13 electrons
Show the answer

13 protons, 14 neutrons and 10 electrons

Protons = 13. Neutrons = 27 - 13 = 14. The 3+ charge means 3 electrons were lost, so electrons = 13 - 3 = 10.

Check your understanding

Two particles both have 8 protons, with 8 and 10 neutrons. One of them has 10 electrons. What can you conclude?

  1. Both are oxygen isotopes, and the particle with 10 electrons is an O2- ion.
  2. They are isotopes, so the one with 10 neutrons must also have 10 electrons.
  3. They are two different elements, because their nucleon numbers are different.
Show the answer

Both are oxygen isotopes, and the particle with 10 electrons is an O2- ion.

The same proton number (8) means the same element, oxygen. Different neutron numbers make them isotopes. Ten electrons against 8 protons gives a 2- charge, which is about electrons, not the nucleus.

Quick revision

Revisit the essentials, then return to an explanation when you need it.

Exam definitions: learn these in mark-scheme words
TermDefinition to write
Proton (atomic) numberThe number of protons in the nucleus of an atom.
Nucleon (mass) numberThe total number of protons and neutrons in the nucleus of an atom.
IsotopesAtoms of the same element with the same number of protons but different numbers of neutrons. They have the same chemical properties because they have the same number of electrons (the same electronic configuration).

State changes rearrange particles; heating does not enlarge them. Z counts protons, A counts protons plus neutrons. Isotopes change neutron number; ions change electron number.

Counting reminder
QuantityRule
ProtonsZ
NeutronsA - Z
ElectronsZ minus positive charge, or Z plus magnitude of negative charge

Scope

Learning outcomes

2. The Particulate Nature of Matter (K223 / K225). Use the outcome map to find the explanation for a particular syllabus requirement.

See the learning outcome map
  1. 2.1(a) Explain states and their interconversion

    • Solid, liquid and gas particle arrangements and movements
    • Melting, freezing, boiling/evaporation, condensation, sublimation
    • Energy changes during state changes

    Solids, liquids and gasesChanges of state and heating curves

  2. 2.2(a) Compare subatomic particles

    • Relative charges and approximate relative masses of proton, neutron, electron

    Inside an atom

  3. 2.2(b) Represent atomic structure

    • Nucleons in nucleus
    • Electrons in shells shown in a diagram
    • No s/p/d/f classification

    Inside an atom

  4. 2.2(c) Define proton and nucleon numbers

    • Proton number Z
    • Nucleon number A

    Atomic numbers, isotopes and ions

  5. 2.2(d) Read and write nuclide notation

    • Carbon-12 notation
    • Atomic and mass-number positions

    Atomic numbers, isotopes and ions

  6. 2.2(e) Recognize isotopes

    • Same proton number; different neutron number

    Atomic numbers, isotopes and ions

  7. 2.2(f) Count particles in atoms and ions

    • Use proton/nucleon numbers
    • Account for positive and negative ion charges

    Atomic numbers, isotopes and ions