Skip to notes
9476 / 2027
Electrochemistry

Lesson 8 of 9

Electrolysis calculations

Turn current and time into charge, moles of electrons and the mass or volume of product.

A-Level 9476 (2026-2027)

  • I can relate Faraday, Avogadro and electron-charge constants.Syllabus

    Syllabus 9476, 12(l). Relate Faraday, Avogadro and electron-charge constants.

  • I can calculate charge and electrolysis yield.Syllabus

    Syllabus 9476, 12(n). Calculate charge and electrolysis yield.

Turn charge into product through the half-equation

Q = It gives the charge; divide by F to get moles of electrons, then use the half-equation to get moles of product.

Make a guess. You are not marked.

Copper is deposited from CuSO4(aq). The current is doubled and the time is halved. What happens to the mass of copper deposited?

  1. It doubles, as the current doubled
  2. It stays the same
  3. It halves, as the time halved
Show the answer

It stays the same

Charge Q = It. Doubling I and halving t leaves Q unchanged, so the same moles of electrons reduce the same amount of Cu2+.

The Faraday constant, F, is the charge on one mole of electrons. F = Le, where L is the Avogadro constant and e is the charge on one electron. The Data Booklet uses L = 6.02 × 1023 mol-1, e = 1.60 × 10-19 C and F = 9.65 × 104 C mol-1. The small difference in multiplying the printed rounded constants comes from rounding.

Michael Faraday showed in the 1830s that the mass of product is proportional to the charge passed. The Faraday constant is named after him. Since the 2019 revision of the SI units, it has an exact value, about 96 485 C mol-1.

For a constant current, Q = It, with current in amperes, time in seconds and charge in coulombs. Then n(e-) = Q/F. Divide by the number of electrons required per product particle in the half-equation. Finally use mass = amount × molar mass, or gas volume = amount × the stated molar volume. If current varies, Q is the area under the current-time graph.

The charge-to-product calculation

Current multiplied by time gives charge. Dividing by the Faraday constant gives moles of electrons. The balanced half-equation converts electron amount into product amount, which can then be converted to mass or gas volume.

Do not convert charge directly to moles of metal without the electron ratio: Ag+, Cu2+ and Al3+ require different electron amounts.

Worked exampleOne current, two electrode products

Pass 2.50 A for 1930 s through aqueous CuSO4 using inert electrodes. Find copper mass and oxygen volume at a molar gas volume of 24.0 dm3 mol-1. Use F = 9.65 × 104 C mol-1, M(Cu) = 63.5 g mol-1, sufficient Cu2+, and 100% current efficiency.

Try it first. Then show the worked stepsHide the worked steps
  1. Q = 2.50 × 1930 = 4825 C. Hence n(e-) = 4825/96500 = 0.0500 mol.
  2. Cu2+ + 2e- → Cu, so n(Cu) = 0.0500/2 = 0.0250 mol.
  3. m(Cu) = 0.0250 × 63.5 = 1.5875 g.
  4. 2H2O → O2 + 4H+ + 4e-, so n(O2) = 0.0500/4 = 0.0125 mol.
  5. V(O2) = 0.0125 × 24.0 = 0.300 dm3.
Answer

Copper mass = 1.59 g; oxygen volume = 0.300 dm3 = 300 cm3. The same charge passes both electrodes, but the product amounts differ because their electron ratios differ.

Try it step by step

Work it out in steps: Charge, Q = It, then Moles of electrons, Q/F, then Moles of product from the half-equation, then Mass of product.

  1. Problem 1. A current of 1.50 A passes for 3860 s through aqueous silver nitrate. Ag+ + e- -> Ag. Find the mass of silver deposited, in g to 3 significant figures. Use F = 96 500 C mol-1 and Ag = 107.9.
  2. Problem 2. A current of 2.00 A passes for 3860 s through aqueous copper(II) sulfate. Cu2+ + 2e- -> Cu. Find the mass of copper deposited, in g to 3 significant figures. Use F = 96 500 C mol-1 and Cu = 63.5.
  3. Problem 3. A current of 0.500 A passes for 5790 s through molten aluminium oxide. Al3+ + 3e- -> Al. Use F = 96 500 C mol-1 and Al = 27.0. Give each answer to 3 significant figures.
Show the answer

Problem 1.

Charge, Q = It: Q = 1.50 x 3860 = 5790 C.

Moles of electrons, Q/F: n(e-) = 5790 / 96 500 = 0.0600 mol.

Moles of product from the half-equation: One electron per Ag, so n(Ag) = 0.0600 mol.

Mass of product: m = 0.0600 x 107.9 = 6.47 g.

Problem 2.

Charge, Q = It: Q = 2.00 x 3860 = 7720 C.

Moles of electrons, Q/F: n(e-) = 7720 / 96 500 = 0.0800 mol.

Moles of product from the half-equation: Two electrons per Cu, so n(Cu) = 0.0800 / 2 = 0.0400 mol.

Mass of product: m = 0.0400 x 63.5 = 2.54 g.

Problem 3.

Charge, Q = It: Q = 0.500 x 5790 = 2895 C, which is 2.90 x 103 C to 3 significant figures.

Moles of electrons, Q/F: n(e-) = 2895 / 96 500 = 0.0300 mol.

Moles of product from the half-equation: Three electrons per Al, so n(Al) = 0.0300 / 3 = 0.0100 mol.

Mass of product: m = 0.0100 x 27.0 = 0.270 g.

Check your understanding

The same charge deposits 0.0100 mol of silver from Ag+ and some copper from Cu2+. How many moles of copper form?

  1. 0.0100 mol, because the charge passed is the same
  2. 0.00500 mol, because each Cu needs two electrons
  3. 0.0200 mol, because copper ions carry twice the charge
Show the answer

0.00500 mol, because each Cu needs two electrons

0.0100 mol Ag needs 0.0100 mol of electrons. The same electrons deposit 0.0100 / 2 = 0.00500 mol Cu. Equal charge means equal electrons, not equal moles of metal.

Watch out for this

A student says: "Molten MgCl2 is electrolysed and 0.200 mol of electrons pass. So 0.200 mol of magnesium, 4.86 g, forms." What is wrong with this?

Show the answer

Each Mg2+ ion needs two electrons: Mg2+ + 2e- -> Mg. So 0.200 mol of electrons gives 0.100 mol of Mg, which is 0.100 x 24.3 = 2.43 g. A November 2022 Cambridge report says a significant number of candidates lost a mark because their calculation was based on Mg+ not Mg2+.